1 files changed, 0 insertions, 49 deletions
diff --git a/project/Core/Src/LED.c b/project/Core/Src/LED.c
deleted file mode 100644
index 8b1b9b2..0000000
--- a/project/Core/Src/LED.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include "LED.h"
-
-
-//******************************************************************************************
-// User LED = LD2 Green LED = PA.5
-//******************************************************************************************
-#define LED_PIN 5
-
-void LED_Init(void){
-	
-	// Enable the peripheral clock of GPIO Port	
-	RCC->AHB2ENR |= RCC_AHB2ENR_GPIOAEN;	
-
-	// GPIO Mode: Input(00), Output(01), AlterFunc(10), Analog(11, reset)
-	GPIOA->MODER &= ~(3U<<(2*LED_PIN));  
-	GPIOA->MODER |= 1U<<(2*LED_PIN);      //  Output(01)
-	
-	// GPIO Speed: Low speed (00), Medium speed (01), Fast speed (10), High speed (11)
-	GPIOA->OSPEEDR &= ~(3U<<(2*LED_PIN));
-	GPIOA->OSPEEDR |=   3U<<(2*LED_PIN);  // High speed
-	
-	// GPIO Output Type: Output push-pull (0, reset), Output open drain (1) 
-	GPIOA->OTYPER &= ~(1U<<LED_PIN);       // Push-pull
-	
-	// GPIO Push-Pull: No pull-up, pull-down (00), Pull-up (01), Pull-down (10), Reserved (11)
-	GPIOA->PUPDR   &= ~(3U<<(2*LED_PIN));  // No pull-up, no pull-down
-	
-}
-
-//******************************************************************************************
-// Turn LED On
-//******************************************************************************************
-void LED_On(void){
-	GPIOA->ODR |= (1UL<<LED_PIN);
-}
-
-//******************************************************************************************
-// Turn LED Off
-//******************************************************************************************
-void LED_Off(void){
-	GPIOA->ODR &= ~(1UL<<LED_PIN);
-}
-
-//******************************************************************************************
-// Toggle LED 
-//******************************************************************************************
-void LED_Toggle(void){
-	GPIOA->ODR ^= (1UL<<LED_PIN);
-}